| Revisions — Version 7.0–8.0 |
To list revisions to the Panther Service Manual |
| Panther Fusion System Service Manual AW-14592 Rev.002
|
Merged the Fusion System Service Manual with the Panther System Service Manual |
| Throughout — Fixed Grammatical, Verbiage, Spelling errors, and general flow for improved readability |
Improve readability and experience |
| Throughout — Removed unneeded or duplicated words, sentences, and/or procedure steps |
Improve readability and experience |
| Throughout — Updated formatting throughout the entire manual for consistency between text type, photos, diagrams, tables, and general formatting. |
Improve readability and experience |
| Revision History
|
Added Revisions - Version 7.0 - 8.0 |
| Welcome Screen |
New welcome screen that incorporates the Panther and Fusion Service Manuals |
| RTF Information
|
New topic based upon the introduction of Real-Time Fluorometers. TB-00765 and TB00796 |
| Real-Time Fluorometer (RTF) Installation
|
New topic based upon TB-00765 Real-Time Fluorometer (RTF) Installation Procedure |
| Real-Time Fluorometer (RTF) Alignment Procedure
|
New topic based upon TB-00796 Real-Time Fluorometer (RTF) Alignment Procedure |
| CAN-Bus-Terminator Installation
|
New topic based upon TB-01278 CAN Bus Terminator Installation |
| Pipettor / Z-Motor Meshing Adjustment
|
New topic based upon TB-01309 New Pipettor Z-Motor Mesh Shim Tool |
| Updated Linear Distributor Model Information
|
New topic based upon TB-01161 Linear Distributor Module Upgrade |
| Pipettor DiTi Cleaning
|
New topic based upon TB-01150 DiTi Cleaning |
| Installing New Hand-held Barcode Scanner (F560) and Bracket Install Procedure
|
New topic based upon TB-01065 New Handheld Barcode Scanner and Bracket Install Procedure |
| Incubator Parameter Verification Procedure
|
New topic based upon TB-01090 Incubator Parameter Verification Procedure |
| How to Use the Pipettor Rail Alignment Tool
|
New topic based upon TB-00730 Pipettor Parallel Tool |
| How to Install the Vacuum Manifold Insert
|
New topic based upon TB-00984 Installing the Vacuum Manifold Insert |
| Incubator Belt Removal and Replacement
|
New topic based upon TB-01332 Incubator Belt Replacement Procedure |
| Recovering Configuration from Firewall (5505 Only)
|
New topic based upon ISE and FSE experience |
| SysCheck - Lumo PMT Calibration Procedure
|
New topic based upon GP11-246-FSN Syscheck Luminometer Verification Procedure |
| Securing Amplification Incubator Foam Inserts
|
New topic based upon TB-00812 Securing Amplification Incubator Foam Inserts |
| Universal Fluid Drawer Solenid Valve Inspection
|
New topic based upon TB-01201 Universal Fluid Drawer Solenoid Valve Inspection |
| Setting the Input Voltage Range for the Eaton PW9130 UPS
|
New topic based upon GP12-256-FSN Setting the Input Voltage Range for the Panther UPS |
| Pipettor Gantry Rail Maintenance Procedure
|
New topic based upon TB-00828 Pipettor Gantry Rail Maintenance Procedure |
| TCR Door Grounding Brush Installation
|
New topic based upon TB-01047 Installation of TCR Door Grounding Brush |
| Bottle Straw Connections
|
New topic based upon TB-00973 Release of New Bottle Straw Connections for Universal Fluid Bottles |
| Input Queue Screw Fastening and Inspection Procedure
|
New topic based upon GP12-247-FSN Input Queue Screw Fastening and Inspection Procedure |
| Check 24V Power Supply Screw Connection
|
New topic based upon TB-01188 Check 24V Power Supply Screw Connection |
| Vacuum Housing Upgrade from Configuration 1 to Configuration 2
|
New topic based upon GP12-234-FSN Vacuum Housing with Speed Control Retrofit |
| Luminometer Control PCB Removal and Replacement
|
New topic based upon TB-00870 Luminometer Control PCB Removal and Replacement |
| Filling the Cooling Module (Dual and Single Fan)
|
New topic based upon TB-00782 Servicing and Replacing Fluid in the Liquid Cooling Module |
| Database Backup and Restore
|
New topic based upon TB-00743 Database Backup and Restore |
| Vacuum Pump (Configuration 1) Wiring Inspection and Rerouting
|
New topic based uponGP11-240-FSN Vacuum Pump Wiring Inspection and Rerouting |
| LD Head Height Adjustment and Center Alignment
|
New topic based upon TB-01180 Distributor Hook Height Adjustment and Center Alignment Procedure |
| Pipettor Pressure Integrity Test
|
New topic based upon TB-01116 New Results Range for Pipettor Pressure Integrity Test |
| TCR Carousel Drip Shield Installation
|
New topic based upon GP11-237-FSN Installation of TCR Mixer Drip Shield |
| Enabling a Mapped Network Drive / LIS Fileshare
|
New topic based upon TB-00784 Enabling a Mapped Network Drive |
| |
New topic based upon TB-00963 Creating Bootable USB Flash Drive |
| Configuring the Quad Head Vacuum Pump Speed
|
New topic based upon TB-00779 Configuring Quad Head Vacuum Pump Speed |
| Vacuum Module (Configuration 2) PCB Removal and Replacement
|
New topic based upon GP12-235-FSN Vacuum Control Board Replacement |
| Ported Vacuum Manifold Silencer Plate Installation
|
New topic based upon GP11-238-FSN Installation of the Ported Vacuum Manifold Silencer Plate |
| Ported Vacuum Manifold Cover
|
New topic based upon GP11-214-FSN Installation of the Ported Vacuum Manifold Cover |
| Distributor Theta Motor Removal and Replacement
|
New topic based upon TB-00989 Linear Distributor Theta Motor Replacement Procedure |
| Distributor Alignment and Teaching Procedure
|
New topic based upon GP12-201-FSN Initializing the Distributor Between Module Teachings in Service Software |
| Inspection and Repair Procedure for the Bleach Bottle Detection Sensor
|
New topic based upon GP12-228-FSN Bleach Bottle Detection Sensor Inspection and Repair |
| New TCR Teach Tool for Molded TCR Carousel
|
New topic based upon TB-00788 New TCR Teach Tool for Molded TCR Carousel |
| Input Queue MTU Rail Alignment Procedure
|
New topic based upon TB-00979 Input Queue Rail Alignment |
| Waste Bottle CPC Coupling Integrity Check
|
New topic based upon TB-01120 Waste Bottle CPC Coupling Integrity Check |
| Replace the Two Male Fittings in the Waste Drawer that Connect to the Waste Bottle
|
New topic based upon TB-00763 Replacing 2 Male Fittings in Waste Drawer that Connect to Waste Bottle |
| Vacuum Pump/Cooling Module Fuse Upgrade Procedure
|
New topic based upon GP12-267-FSN Vacuum Pump and Cooling Module Fuse Upgrade |
| Vacuum System Troubleshooting Guide
|
New topic based upon GP12-246-FSN Vacuum System Trouble Shooting Guide |
| Remote Dashboard Syscheck Cal Factor Update
|
New topic based upon TB-01347 Review Syscheck Report Prior to Updating Cal Factor |
| Cleaning and Applying Grease to the Output Queue Injector
|
New topic based upon GP12-221-FSN Cleaning and Applying Grease to OQ Injectors |
| Apply Canopy Door Labels
|
New topic based upon TB-01124 Icon Labels for Canopy Doors |
| Inspection and Replacement of System Vacuum Tubing
|
New topic based upon TB-00822 Inspection and Replacement of System Vacuum Tubing |
| Tapping the Waste Bottle Mounting Block
|
New topic based upon TB-00958 Waste Bottle Mounting |
| Output Queue Cover Installation
|
New topic based upon GP11-253-FSN Output Queue Guided Cover Upgrade |
| Connecting the UPS to the Panther PC
|
New topic based upon TB-00917 Connecting UPS to Panther |
| Auto Detect Line Purge Procedure
|
New topic based upon TB-01172 Auto Detect Line Purge Procedure |
| Inspecting and Replacing Canopy Door Shocks
|
New topic based upon TB-00836 Inspecting and Replacing Canopy Door Shocks |
| Installation of the Secondary Vacuum Muffler
|
New topic based upon GP11-213-FSN Secondary Vacuum Muffler |
| Door Clip Inspection
|
New topic based upon TB-01125 Incubator Door Clip Notification |
| Shave Foam Off Incubator Door
|
New topic based upon TB-01036 Shave Foam Off Incubator Door |
| Luminometer Transport Drive Alignment Procedure
|
New topic based upon TB-01162 Luminometer Transport Drive Alignment Check |
| Sample Bay Cover and Pipettor Interference Check
|
New topic based upon TB-01113 Sample Bay Cover and Pipettor Interference Check |
| Inspection of Teach Caps for Damage
|
New topic based upon TB-00854 Inspection of Panther Teach Caps for Damage |
| Bleach Bottle Tubing Replacement Procedure (Solvent Bonded Connection)
|
New topic based upon GP13-206-FSN Bleach Bottle Tube Upgrade to Solvent Bonded Connection |
| Bleach Bottle Fitting
|
New topic based upon GP11-210-FSN Bleach Bottle Fitting Upgrade Kit |
| Bleach Bottle Fitting Upgrade Kit
|
New topic based upon GP11-210-FSN Bleach Bottle Fitting Upgrade Kit |
| Incubator Door Clip Installation
|
New topic based upon GP12-241-FSN Incubator Door Clip |
| MTU Input Queue Detent Mechanism Adjustment
|
New topic based upon GP11-243-FSN Input Queue Detent Mechanism Adjustment |
| Waste Bottle Rotational Floats Inspection Procedure
|
New topic based upon GP12-243-FSN Waste Bottle Rotational Float |
| Cleaning the Output Queue Cover’s Stanchion
|
New topic based upon TB-00982 Cleaning OQ Cover Stanchion |
| Output Queue Upgrades
|
New topic based upon GP12-266-FSN Output Queue Injector and Injector Housing Upgrade |
| MagWash Aspiration Tubing Replacement Procedure
|
New topic based upon GP12-207-FSN MagWash Aspiration Tubing Replacement Procedure |
| Vacuum Module (Configuration 2) Fan Removal and Replacement
|
New topic based upon GP13-219-FSN Replacing Vacuum Housing Fan |
| Vacuum Pump 24V Power Cable Routing Procedure
|
New topic based upon GP12-265-FSN Vacuum Pump 24V Power Cable |
| Magnetic Latch Part Numbers
|
New topic based upon TB-00947 Procedure for Installing Magnetic Latches for Universal Fluid Drawer and Waste Drawers |
| Magnetic Latch Installation
|
New topic based upon TB-00947 Procedure for Installing Magnetic Latches for Universal Fluid Drawer and Waste Drawers |
| Luminometer Required Upgrades
|
New topic based upon GP11-235-FSN Luminometer Cable Upgrade to PMT Cable with Ferrite EMI Filter |
| TCR Carousel Mixer Motor Removal and Replacement
|
New topic based upon GP13-207-FSN TCR Motor Spare Part |
| Applying Safety Label on Spare IQ Modules
|
New topic based upon GP13-228-FSN Missing Safety Label on Spare Panther Input Queue Modules |
| CEE 7/7 Power Cords for European Systems
|
New topic based upon GP11-254-FSN CEE Power Cords for European Panther Use |
| Installation of Replacement Leveling Feet
|
New topic based upon GP12-229-FSN Installation of Replacement Leveling Feet |
| Installation of the MagWash and Pump Module Drip Shields
|
New topic based upon GP11-276-FSN Installing Pump Module Drip Shield and MagWash Drip Shields |
| Identifying Loose MagWash and Load Station MTUs
|
New topic based upon TB-00731 Identifying Loose MagWash and Load Station MTU |
| Checking the Output Queue Injector for Leaks
|
New topic based upon GP12-226-FSN Inspecting the Output Queue Injector for Leaks |
| Installing the Peristaltic Pump Tubing on New Panther Systems
|
New topic based upon GP12-224-FSN Installing the Peristaltic Pump Tubing on New Panther Systems |
| Left and Right Chassis Fan Removal and Replacement
|
New topic based upon GP11-229-FSN Replacing the Left and Right Chassis Fans with the Left and Right Dual Chassis Fan Assemblies |
| Replace Plastic MTU Carriers
|
New topic based upon GP12-244-FSN Load Station and MagWash MTU Carriers |
| Printer Installation
|
New topic based upon ISE and FSE experience |
| Printer
|
New topic based upon ISE and FSE experience |
| Cooling Module Removal and Replacement List (Single Fan, old)
|
New topic to separate the Single Fan and Dual Fan Cooling Module |
| Cooling Module Removal and Replacement List (Dual Fan)
|
New topic to separate the Single Fan and Dual Fan Cooling Module |
| Cooling Module Dual Fan Removal and Replacement |
New topic to separate the Single Fan and Dual Fan Cooling Module |
| Cooling Module Add-On Shroud Installation (Single Fan)
|
New topic based upon ISE and FSE experience |
| Cooling Module Coolant Pump Removal and Replacement (Dual fan)
|
New Part Release |
| Cooling Module Peltier Module Removal and Replacement (Dual Fan)
|
New Part Release |
| OdorCarb Vacuum Filter Removal and Replacement
|
New Part Release |
| Firewall Module
|
New topic based upon ISE and FSE experience |
| Monitor
|
New topic based upon ISE and FSE experience |
| PC
|
New topic based upon ISE and FSE experience |
| Vacuum Module (Configuration 1) Dual-Head Pump Removal and Replacement
|
New topic based upon ISE and FSE experience |
| Vacuum Module (Configuration 1) PCB Removal and Replacement
|
New topic based upon ISE and FSE experience |
| Vacuum Module (Configuration 1) Muffler Removal and Replacement
|
New topic based upon ISE and FSE experience |
| Vacuum Module (Configuration 2) Removal and Replace
|
New topic based upon TB-00841 Panther Vacuum Configuration Information |
| Vacuum Module (Configuration 2) Dual-Head Pump Removal and Replacement
|
New topic based upon TB-00841 Panther Vacuum Configuration Information |
| Vacuum Module (Configuration 2) Special Notes/Instructions
|
New topic based upon ISE and FSE experience |
| Vacuum Pump Line Fuse Installation - 24V+ Power Supply
|
New topic based upon ISE and FSE experience |
| Vacuum System Removal and Replacement List (Configuration 3)
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) Removal and Replacement
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) PCB Removal and Replacement
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) Fan Removal and Replacement
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) Muffler Removal and Replacement
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) Quad-Head Pump Removal and Replacement
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum Module (Configuration 3) Special Notes/Instructions
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Upgrade to Vacuum Module (Configuration 3) Quad-Head Pump for Serial #00280 and Below
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Upgrade to Vacuum Module (Configuration 3) Quad-Head Pump for Serial #00281 and Above
|
New topic based upon TB-01393 Stratec Quad Head Vacuum Pump Information and Procedures |
| Vacuum System Components Removal and Replacement List (System)
|
New topic based upon ISE and FSE experience |
| Vacuum Service Procedures
|
New topic based upon ISE and FSE experience |
| Imaging the Panther System XE2 Workstation
|
New topic based upon TB-00935 Dell Optiplex XE2 Installation |
| Installing the HP Officejet 6100, 6230 and 8100 Printers
|
New topic based upon TB-00774 Installation Instructions for HP Officejet 6100, Officejet Pro 8100, or Officejet 6230 Printeres |
| Cooling Module Ambient Temperature Sensor Removal and Replacement
|
New topic based upon ISE and FSE experience |
| Cooling Module Temperature Sensor Removal and Replacement (Single Fan)
|
New topic based upon ISE and FSE experience |
| Cooling Module Temperature Sensor Removal and Replacement (Dual Fan)
|
New topic based upon ISE and FSE experience |
| Disabling the Auto Shutoff Feature on the HP Officejet Printers
|
New topic based upon TB-01043 Disabling the Auto Shutoff Feature on the HP Officejet Printers |
| Enable Touchscreen Functionality for Windows 7
|
New topic based upon ISE and FSE experience |
| Distributor Hook-Axis Cable Folding Instructions
|
New topic based upon ISE and FSE experience |
| Distributor Theta-Axis Cable Folding Instructions
|
New topic based upon ISE and FSE experience |
| Distributor X-Axis Cable Folding Instructions
|
New topic based upon ISE and FSE experience |
| PCAP Monitor Upgrade
|
New Part Release |
| Cartridge Carousel Internal Fan Removal and Replacement Procedure
|
New topic based upon TB-01358 Cartridge Carousel Internal Fan Replacement Procedure |
| Unlocking the PC BIOS on a Dell Optiplex XE2
|
New topic based upon TB-00935 Dell OptiPlex XE2 Installation |
| Chiller Ramp Upgrade Procedure
|
New topic based upon GP13-218-FSN Chiller Ramp Upgrade Procedure |
| Cooling Module Pump Diaphragm and Valves Removal and Replacement
|
New topic based upon TB-01408 Replacing the Diaphragm and Valves on the Cooling Module Pump |
| Output Queue Hook Drive Belt Assembly Removal and Replacement
|
New topic based upon TB-01479 Output Queue Hook Drive Belt Assembly Replacement |
| |
|
| |
|
New Topics
button at the top of the page to send feedback, comments, or change requests.