Printer Installation

1. Unpack the Printer.

2. Plug the Printer Power into the UPS.

3. Plug the Printer Com Cable into the correct port in the back of the PC.

4. If the system will be on SW version 6.2 or higher, and this is an install, continue to Firewall and Network Connections.

5. If the system will be on SW version 6.2 or higher, and this is not an install, start Panther SW and Navigate to Admin-> Configuration-> Printer, and select the printer from the drop down. Print a test report to verify functionality.

6. If the System will be on SW version 5.3 or lower, select the correct Printer below, and continue with the Printer Installation.

• Installing the HP Officejet 6000 Printer
• Installing the HP Officejet 8000 Printer
• Installing the HP Officejet 6100, 6230 and 8100 Printers
• Disabling the Auto Shutoff feature on the HP Officejet Printers