Magnetic Latch Part Numbers

Background

Some Universal Fluid and Waste Drawers may have plastic retaining clips mounted on the drawer rails to keep the drawers closed. These clips break frequently, causing failures indicated by “Waste drawer not locking…” or “Universal Fluid Drawer sensor reading as Not Closed…” error messages.

To address this issue, magnetic latch assemblies were designed to mount on each of the drawer railings to replace the plastic retaining clips.

The table below lists the magnetic latch part numbers to use by system serial number.

Serial Number	Type of Magnetic Latch	Waster Drawer	Universal Fluid Drawer
00001–00099	No latches possible	Frame/chassis does not accommodate magnetic latch hardware
00100–01936	Hologic design	ASY-09018 Lock is on the left of the drawer as you face the Panther	ASY-09015 Lock is on the right of the drawer as you face the Panther
01937 and up	Stratec design	New design cut-in, not available as a spare part
01937 and up	Stratec design	Lock is on the right of the drawer as you face the Panther	Lock is on the left of the drawer as you face the Panther