Revisions—Version 6.1–7.0

AW-11136 Rev. 001 Version 7.0, 2014-03

The following procedures and sections were updated with Version 7.0 of the Panther System Service Manual.

New Topics

Topic	Justification
Revisions—Version 6.1–7.0	To list revisions to the Panther Service Manual
Revision History	Added Revisions–Version 6.1–7.0
Installing All Panther Software	New topic based upon update to installation CDs described in GP11-248-FSN Procedures for Panther Software Installation
Upgrading Software at Current Panther Locations	New topic based upon update to installation CDs described in GP11-248-FSN Procedures for Panther Software Installation
RDxM and LIS Configuration Capture	New topic based upon update to installation CDs described in GP11-248-FSN Procedures for Panther Software Installation
Health Reports	New topic based upon GP12-206-FSN Dashboard Software Functionality for Service Pack 4
Electrostatic Discharge (ESD)	Standard warning inadvertently omitted from previous releases.
Panther Preventative Maintenance—6-Month Interval	New topic to facilitate generation of a PDF of the entire 6-Month PM procedure.
Panther Preventative Maintenance—12-Month Interval	New topic to facilitate generation of a PDF of the entire 12-Month PM procedure.
Panther System Firewall Configuration Wizard	New topic based upon update to installation CDs described in GP11-248-FSN Procedures for Panther Software Installation
Connecting the Configured Firewall to the Panther Instrument	New topic based upon update to installation CDs described in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software
Cooling Module Add-On Shroud Installation	New topic based upon GP11-226-FSN Installation of the Cooling Module Add-On Shroud
Circulation Pump Cover Installation	New topic based upon GP11-271-FSN Panther System - Installation of the Circulation Pump Cover
Incubator Axis PCB Removal and Replacement	New topic requested by module owner and service engineers.
Magnetic Wash Station Module Drip Shield Installation	New topic based upon GP11-276-FSN Installation of the Pump Module Drip Shield and the MagWash Drip Shields
Pumps Module Drip Shield Installation	New topic based upon GP11-276-FSN Installation of the Pump Module Drip Shield and the MagWash Drip Shields
Output Queue Cover Installation	New topic based upon GP11-253-FSN Panther System - Output Queue Guided Cover Upgrade
TCR Door Alignment Video	New topic based upon GP11-250-FSN TCRTarget capture reagent—An assay-specific reagent added as part of specimen pipetting. Door Lock Adjustment Procedure
TCR Door Alignment and Adjustment	New topic based upon GP11-250-FSN TCR Door Lock Adjustment Procedure
TCR Carousel Drip Shield Installation	New topic based upon GP11-237-FSN Installation of TCR Mixer Drip Shield
TCR Motor Mount Removal and Replacement	New topic based upon GP11-277-FSN Panther System - Installation of the New TCR Mixer Motor Mount
Vacuum System Removal and Replacement List	List topic to accommodate addition of Vacuum Housing Removal and Replacement topic
Vacuum Housing Removal and Replacement	New topic based upon GP12-204-FSN Vacuum Housing Retrofit Procedure
Waste Bottle Male Fitting Removal and Replacement	New topic based upon ISE and FSE experience.
Distributor Alignment to the MTU Scanner	New topic based upon ISE and FSE experience.
Defragmenting the Panther System PC	New topic based upon ISE and FSE experience.
Distributor MTU Handoff Position Adjustment	New topic based upon GP12-220-FSN Adjust the Linear Distributor MTUMulti-tube unit—Container used to process tests in the instrument. An MTU contains five separate reaction tubes. The MTU is moved through the instrument by the linear distributor and includes five tiplets for pipettiing to be used in the mag wash station. Handoff Position
Panther Field Service Records	New topic based upon ISE and FSE experience.
Cleaning and Applying Grease to the Output Queue Injector	New topic based upon GP12-221-FSN Cleaning and Applying Grease to the Output Queue Injector
Installing the Peristaltic Pump Tubing on New Panther Systems	New topic based upon GP12-224-FSN Installing the Peristaltic Pump Tubing on New Panther Systems
Inspecting and Cleaning the Sample Dispense Slot	New topic based upon ISE and FSE experience.
Starting Service Software	New topic based upon ISE and FSE experience.
Inspecting and Cleaning the Tip Eject Chute	New topic based upon ISE and FSE experience.
Panther System Total Service Call Guidelines	New guideline document used by service engineers.
UPS and Battery Maintenance	New topic based upon ISE and FSE experience.
Windows Activation on the Panther System PC	New topic based upon GP11-284-FSN Panther System - Windows Activation on the Panther System PC
Luminometer Block Diagram	Additional reference information for Service Engineers
Draining the Coalescing Trap Procedure	New topic based upon ISE and FSE experience.
Unlocking the PC BIOS	New topic based upon GP11-267-FSN Unlocking the Panther System PC BIOS
Vacuum Manifold Pressure Sensor Port Cleaning	New topic based upon ISE and FSE experience.
Installing Panther Dashboard Software	New topic based upon GP12-206-FSN Dashboard Software Functionality for Service Pack 4
Cleaning Requirements	Replacement for Decontaminating the Instrument, requested by Marketing
MTU Input Queue Detent Mechanism Adjustment	New topic based upon GP11-243-FSN Input Queue Detent Mechanism Adjustment
Changing the Time Format from 12-Hour to 24-Hour for Windows Vista	New topic based upon ISE and FSE experience.
Pipettor Automatic Module Teaching	New topic to document new feature in Panther Service Software.
Luminometer MTU Tube Position Teaching	New topic based upon ISE and FSE experience.

Revised Topics

Installation Procedures

Topic	Additions	Deletions	Justification
Pre-Site Evaluation Form	From the Panther System Service Manual 903483 Rev. A, Ver. 6.0 (in header)	P10233-0473 Rev. B	To reflect new MN and Rev.
Installation Logistics	N/A	Reagent Ship Date	Clarification based upon Field Service experience.
Materials	Fluke Multimeter	Ethernet cable	Clarification based upon Field Service experience.
Receiving and Unloading	Reordered questions	N/A	Clarification based upon Field Service experience.
Space Requirements	800 lbs [363 kg])	755 lbs (344 kg)	To reflect new weight of Panther Instrument.
	Is the proposed area considered an APTIMA AssayProcedures required to prepare and perform a specific test. In the context of this document, assay refers exclusively to a Hologic test, such as Aptima Combo or Ultrio. pre- or post-amplification area? If Yes, contact Sales, FTS, and Service Manager about location.	Is the proposed area considered a pre- or post-amplification area for other molecular assays?	Change requested by Marketing.
Power Requirements	Information for Type E and Type F sockets.	N/A	Per GP11-254-FSN
Environmental Requirement	Temperature: 15° to 30° C Humidity: 20% to 85% Note: It is the responsibility of the customer to be able to monitor and maintain humidity an temperature requirements per assay package insert. This may include installation of a humidifier or air conditioning unit if requirements cannot be met.	N/A	Clarification based upon Field Service experience.
	6, 562'	6,000'	Correction
Assays	What assays does the customer plan to run on the Panther System at install?	N/A	Clarification based upon Field Service experience and Marketing request.
Section II—Network Configuration	Extensive revisions based upon new Network Installation procedures.		Based upon information in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software and GP11-217-FSN Panther System Remote Diagnostics RDxM Installation Instructions
Panther IOPQ Evaluation Form	Revised to match new IOPQ Procedures	N/A	To reflect changes to the Panther Installation Qualification Pro
Panther System Installation	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
	Warning—Unplug the keyboard cable from the Panther System or Panther System PC at the end of every installation and service visit. Visually verify the keyboard cable does not interfere in the closing of the Panther Waste Drawer.	N/A	Warning added per recommendations of Service Engineers.
	N/A	Final Report	Replaced by 19-03-01-005-Appx A.
Panther System Performance Qualification (PQ) Procedure	Information for APTIMA Trichomonas vainalis Assay	N/A	To new APTIMA Assay on Panther System Platform
	Procedure: 3. Disable LIS Communication. 4. Set Sample Handling Configuration to Read Repeat Barcodes.	N/A	Clarification of steps necessary to perform the procedure, based upon field service experience.
	10. b. Decontaminate Sample Racks	10. b. Clean Sample Racks	Request by Marketing
	Validity and Acceptance Criteria	Performance Qualification Analysis	Updated procedure to reflect new Dashboard software functionality.
Backing Up the Stratec.coo File	Detailed instructions for logging in to the Panther FSE Shield software and launching Windows Explorer.	N/A	Clarification based upon Field Service experience.
Creating an Administrator Account in Panther System Software	N/A	1. Launch the Panther FSE Shield software. 2. Select the Panther icon. 3. Log on to the Panther Shield software.	Per Service Engineer review, steps are unnecessary because the engineer will already be logged in through the Panther FSE Shield software.
Instrument Leveling	Caution—Rotate the levelers only 1 full rotation at a time per foot so as not to cause damage to the leveler rods.	N/A	Based on Service Engineer experience.
BIOS Configuration Procedure	1. Shut down and reboot 31. Shut down and reboot	N/A	Based on Service Engineer experience.
Imaging the Panther System Workstation	Panther System CD—Workstation Image Deployment Tool	PNTHR IMAGE VX.X.X/SHIELD VX.X.X CD	To reflect new CD configuration.
Instrument Setup	8. Install the Peristaltic Pump tubing.	N/A	New topic based upon change in shipping configuration.
Installing Software for New Panther Installations	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
	Installing Software for New Panther Installations	Software Installation	Edited to distinguish between new installations and updated installations.
	Updated Required Tools and Materials items	N/A	To reflect new configuration of installation CDs.
	Procedure extensively revised to reflect new installation procedure.	Procedure extensively revised to reflect new installation procedure.	Based upon information in : GP11-215-FSN Additional Items for Panther Installation and Verification, GP11-248-FSN Procedures for Panther Software Installation, GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software, GP11-248-FSN Procedures for Panther Software Installation, GP12-224-FSN Installing the Peristaltic Pump Tubing on New Panther Systems
Installation Qualification	N/A	Remote Service Link (RSL)	This step is now part of software installation.
Remote Diagnostics Installation	1. Panther System Firewall Configuration Wizard	Enabling PRO360° Remote Diagnostics on the Panther firewall	Based upon information in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software
	2. Connecting the Configured Firewall to the Panther Instrument	Installing the Cisco ASA 5505 Hardware	Based upon information in GP11-217-FSN Panther System Remote Diagnostics RDxM Installation Instructions
	N/A	Checking PRO360° Remote Diagnostics Connectivity from the Dashboard Software	Based upon information in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software
Configuring the Panther Computer with a Static IP Address	Extensive revision	Extensive revision	Based upon information in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software
Enabling PRO360° Remote Diagnostics on the Panther System	Extensive revision	Extensive revision	Based upon information in GP11-265-FSN Cisco ASA5505 Firewall Configuration Wizard Software
Laboratory Information System (LIS)	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
LIS Serial Installation	Extensive revision	Extensive revision	Based upon information in GP11-206-FSN Panther System LIS Installation Instructions
LIS TCP/IP Installation	Extensive revision	Extensive revision	Based upon information in GP11-206-FSN Panther System LIS Installation Instructions
Installing the Panther Shield Software	N/A	1. Insert the Panther System Shield CD into the CD ROM drive. 6. Select Open. 12. Restart the PC. The system should automatically log on to the Panther user will boot with the updated Panther Shield Software.	Steps no longer necessary in Panther Shield installer. Per GP11-248-FSN Procedures for Panther Software Installation
	11. Proceed to the next step.	N/A	Clarification
Uninstalling Panther Software	Uninstalling Panther Software and Panther Shield Software	Instructions for uninstalling Panther Software	For consistency with other topic titles
	N/A	This procedure may not be required during initial installation.	Clarification
	USB memory stick or USB external hard drive	N/A	Required tool missing in previous version
	N/A	1. Log in to the Panther FSE Shield software. If the main Panther Shield Software does not boot up and is not on the system, you must install the Panther Shield software.	Correction
	N/A	If Panther System software has not been previously installed, skip this step.	Correction
	Warning—Remove only the seven applications listed above. Do not remove any other applications.	Warning—Do not remove any other applications except for the top 6 scripts.	Clarification to reflect revised software configuration

System Overview

Topic	Additions	Deletions	Justification
Panther Thermal Sensor Ranges for APTIMA Assays	>8 °C, module drop below this value	3.5 °C, module drop below this value

Packing and Relocation

Topic	Additions	Deletions	Justification
Packing and Relocation	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.

Maintenance Procedures

Topic	Additions	Deletions	Justification
Maintenance Procedures	Panther Field Service Records	N/A	New Panther System feature
Panther Preventative Maintenance Schedule—6-Month and 12 Month	Edits	Edits	To reflect changes to the 6-Month and 12-Month Preventative Maintenance Intervals
Panther Preventative Maintenance 6-Month Interval	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
	Review the latest One-Day Health Report, System Health Report, and Maintenance Report	N/A	New features available through Panther System
	Output Queue—Inspect and clean the Output Queue Module, replace OQ Injectors,and clean OQ aspirators	Output Queue (DQ injector)—Inspection and cleaning	Clarification based on field experience.
	Replace the High Temperature Incubator Fan	N/A	Added to PM based on field experience.
	Complete Panther Cleaning	N/A	Added to PM.
	Clean the Vacuum Manifold Pressure Sensor Port	N/A	New procedure
	Perform a Panther Luminometer Flashcheck Reagent Verification Procedure—Only for systems running HPV Assays	N/A	New requirement for systems running HPV Assays
	Perform a Total Service Call	N/A	New service guidelines
	Perform UPS and Battery Maintenance		New procedure based on field experience, verified by module owner
Panther 6-Month PM Checklist	Edits	Edits	To reflect changes to the 6-Month Preventative Maintenance Interval
Panther Preventative Maintenance 12-Month Interval	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure
	Review the latest One-Day Health Report, System Health Report, and Maintenance Report	N/A	New features available through Panther System
	Output Queue—Inspect and clean the Output Queue Module, replace OQ Injectors,and clean OQ aspirators	Output Queue (DQ injector)—Inspection and cleaning	Clarification based on field experience
	Replace the High Temperature Incubator Fan	N/A	Added to PM based on field experience.
	Complete Panther Cleaning	N/A	Added to PM
	Clean the Vacuum Manifold Pressure Sensor Port	N/A	New procedure
	Perform a Panther Luminometer Flashcheck Reagent Verification Procedure—Only for systems running HPV Assays	N/A	New requirement for systems running HPV Assays
	Perform a Total Service Call	N/A	New service guidelines
	Perform UPS and Battery Maintenance	N/A	New procedure based on field experience, verified by module owner
	Replace Liquid Waste Bottle fittings and lubricate the O-rings	Replace and lubricate the Liquid Waste Bottle O-rings	Clarification based on field experience
	Inspect Incubator insulation	N/A	Added to PM based on field experience
	Replace the High Temperature Incubator Fan	N/A	Added to PM based on field experience
	Inspect and clean the Tip Eject Chute as needed	N/A	New procedure added to PM based on field experience
	Inspect and clean the Sample Dispense Slot as needed	N/A	New procedure added to PM based on field experience
	Perform a Defragmentation of the Panther System PC	N/A	New procedure added to PM based on field experience
	Clean the Vacuum Manifold Pressure Sensor Port	N/A	New procedure added to PM based on field experience
Panther 12-Month PM Checklist	Edits	Edits	To reflect changes to the 12-Month Preventative Maintenance Interval

Safety

Topic	Additions	Deletions	Justification
Personal Protective Equipment	prevent cross contamination	prevent gross contamination	Correct typo
General Safety Information	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
	Decontaminating Tools procedure	Cleaning Tools procedure	Requested by Marketing
Electrical Warnings and Precautions	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Cleaning Requirements	Cleaning Requirements cleaning Clean	Decontamination Requirements decontamination Decontaminate	Requested by Marketing

Service Procedures

Topic	Additions	Deletions	Justification
Service Procedures	Edits	N/A	To reflect new content
Cleaning Procedures	Cleaning	All instances of Decontamination, and Decontaminating	Requested by Marketing
	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
Cleaning Modules	Cleaning	Decontamination and Decontaminating	Requested by Marketing
	Gloves	Proper PPE	For consistency with other topics
	2.5%–3.5% sodium hypochlorite	50% bleach solution	For consistency
	2.5%–3.5% sodium hypochlorite	10% bleach solution	For consistency
Cleaning Tools	Cleaning	Decontamination and Decontaminating	Requested by Marketing
	2.5%–3.5% sodium hypochlorite	50% bleach solution	For consistency
Distributor Alignment and Teaching Procedure	"Teaching the Distributor to any Module"	N/A	New topic to document new feature in Panther Service Software.
Pipettor Teaching	Added printable PDF option.	N/A	To provide Service Engineers with the ability to print out the entire procedure.
	Pipettor Teaching	Pipettor Auto-Teaching Alignment Procedure (title)	To incorporate new Automatic Module Teaching procedure.
Output Queue OLV Calibration Procedure	Image for Verification Step 2.	N/A	Corrected missing image.
Changing the PC Workstation Computer Name	Changing the PC Workstation Computer Name	Changing the Computer Name	Title change for clarification
Configuring the Sample Bay Barcode Reader	EAN8/13 must be activated in order to use Code 93.	N/A	Clarification based on field experience
Initializing the System	1. From the Panther FSE Shield software screen, open Service Software.	1. Open Service Software.	Clarification.
Resetting the PC Workstation Clock and Date	Resetting the PC Workstation Clock and Date	Resetting the PC Clock and Date	Clarification
Panther Luminometer SysCheck Reagent Verification Procedure	21. Load the Sample Rack into the first lane containing the four SysCheck Reagent tubes	21.Load the Sample Rack containing the four SysCheck Reagent tubes	Correction of typo
Panther Flashcheck Luminometer Verification Procedure	Added separate procedure for Flashcheck Reagent (Non-Frozen) FSE Kit	N/A	To include instructions for new Flashcheck Reagent formulation. Per

Modules

Topic	Additions	Deletions	Justification
Distributor Module Theory/Sequence of Operation	Distributor Failure Positions table	Distributor Failure Positions table	To reflect new software configuration.
Luminometer Module	Luminometer Block Diagram	N/A	Additional reference information for Service Engineers.
Output Queue Module	Output Queue Service Procedures Output Queue Cover Installation Output Queue Injectors Cleaning Output Queue MTU Presence Sensor Calibration Output Queue OLV Calibration Procedure	Output Queue OLV Calibration Procedure	To list additional Output Queue service procedures
Reagent Bay Module	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Sample Bay Module	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Target Capture Reagent (TCR) Carousel Module	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
	TCR Door Alignment and Adjustment	N/A	Link to new procedure
	TCR Door Alignment Video	N/A	Link to new video
TCR Carousel Module Overview	The TCR Carousel is a rotary mixer carousel that keeps the TCR magnetic particles in suspension. The TCR Carousel also has positions for Target Enhancer Reagent (TER) for the Ultrio Elite Assay. The TER bottles rotate with the carousel, but do not spin around like the TCR bottles. The TCR Carousel has a dedicated barcode reader that ensures correct bottle placement.	The TCR Carousel is a rotary mixer carousel that keeps the TCR magnetic particles in suspension. The TCR Carousel also has positions for modifier bottles (TCR-M for the Ultrio Assay. The modifier bottles rotate with the carousel, but do not spin around like the TCR bottles. The TCR Carousel has a dedicated barcode reader that ensures correct bottle placement. The instrument controls access to one slot at a time to coordinate the loading of TCR/modifier with the Reagent Rack.	To incorporate information related to Ultrio assays.

Removal and Replacement Procedures

Topic	Additions	Deletions	Justification
All Module Removal and Replacement Procedures	If the module will be returned to Gen-Probe, clean the module.	N/A	Clarification
Cooling Module Removal and Replacement List	Add On Shroud Circulation Pump Cover	N/A	To list new procedures
Cooling Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module	Perform a decontamination of the module.
Peristaltic Pump Tubing Removal and Replacement	Instructions for installing Peristaltic Tubing Kit with Fittings	N/A	To provide instructions for new kit
Incubator Door Assembly Removal and Replacement	INCUBATOR DOOR KIT	Incubator Door	To reflect SAP part name
MTU Input Queue Main PCB Removal and Replacement	MTU INPUT Q, MAIN PCB	INPUT Q, MAIN PCB	To reflect SAP part name
MTU Input Queue Scanner Removal and Replacement	Laser Warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
	MTU INPUT Q/TCR CAROUSEL SCANNER	Input Queue barcode scanner	To reflect SAP part name
	If the module will be returned to Gen-Probe, clean the module	Perform a decontamination.	Requested by Marketing.
Load Stations Module Removal and Replacement List	N/A	Cleaning the HPAHybridization protection assay—The Hologic HPA technique uses a specific DNA probe, labeled with an acridinium ester detector molecule that emits a chemiluminescent signal. Load Station MTU Door	Procedure no longer necessary.
HPA Load Station Removal and Replacement	If the module will be returned to Gen-Probe, clean the module	12. Perform a decontamination procedure on the HPA Load Station.	Procedure no longer necessary.
Luminometer Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	12. Perform a decontamination of the module.
Magnetic Parking Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module	Decontaminate the module
Magnetic Wash Station Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module	Decontaminate the module
Output Queue Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module	Decontaminate the module
Output Queue Hook Loader Home Sensor Removal and Replacement	Perform a cleaning.	Perform a decontamination.	Requested by Marketing.
Output Queue Injector Removal and Replacement	2. Be sure to fit the alignment notch on the Output Queue into the tab located on the OLV housing.	N/A	Clarification based upon field experience.
Output Queue Hook Loader Home Sensor Removal and Replacement	Perform a cleaning.	Perform a decontamination.	Requested by Marketing.
Pipettor Arm Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	N/A
Auto Detect Pumps Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	Perform a decontamination of the LCMP.
Reagent Bay Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
Reagent Bay Barcode Scanner	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Sample Bay Module Removal and Replacement	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
Sample Bay Barcode Scanner	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Sample Dispense Slot Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
TCR Carousel Module Removal and Replacement List	TCR Carousel Door Interlock TCR Carousel Drip Shield Installation TCR Carousel Motor Mount	N/A	To include new topics
TCR Carousel Module Removal and Replacement	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
TCR Carousel Scanner Removal and Replacement	Laser warning	N/A	Warning added per P10233-2044 Assessment of Panther Laser Safety Compliance and Product Classification
Tip Eject Chute Station Removal and Replacement	7.d. Remove the rear screw.	7.d. Loosen the rear screw.	Correction based upon field experience.
	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
Tip Drawers Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	Decontaminate the module.
Waste Drawer Removal and Replacement List	Waste Bottle Male Fitting Removal and Replacement	N/A	To list new procedure
Waste Drawer Module Removal and Replacement	If the module will be returned to Gen-Probe, clean the module.	N/A

Deleted Topics

Topic	Justification
Final Report for Panther System Installation	Replaced by 19-03-01-005-Appx A
Installing Panther APTIMA Assay Software	Incorporated into new topic, Installing All Panther Software
Installing Panther Help Software	Incorporated into new topic, Installing All Panther Software
Installing Panther Service Software	Incorporated into new topic, Installing All Panther Software
Installing Panther Teacher Software	Incorporated into new topic, Installing All Panther Software
Installation Qualification	Incorporated into Panther System Installation
Installation of the Cisco ASA 5505 Hardware	Replaced by Connecting the Configured Firewall to the Panther Instrument
Checking PRO360° Remote Diagnostics Connectivity from the Dashboard Software	Replaced by content in Checking PRO360° Remote Diagnostics Connectivity with Technical Support
Decontaminating the Instrument	Replaced by Cleaning Requirements

Click the

button at the top of the page to send feedback, comments, or change requests.