Remote Diagnostics Installation

This section provides instructions for installing the PRO360° Remote Diagnostics hardware and software.

Installation Procedures

The procedures listed in the following table must be performed in sequential order:

  1. Programming the Firewall with Firewall Wizard v6.0.1.0
  2. Hardware Setup after Firewall has been configured
  3. Setting a Panther IP Address on the Panther Workstation
    OR
    Configuring the PC with a Static IP Address
  4. Enabling the PRO360° Remote Diagnostics on the Panther System
  5. Checking PRO360° Remote Diagnostics Connectivity from the Panther Remote Dashboard
  6. Checking PRO360° Remote Diagnostics Connectivity with Technical Support
  7. Disabling the PRO360° Remote Diagnostics on the Panther System (Only if requested by customer)