| Revisions — MAN-06020 Rev. 002 |
To list revisions to the Panther Service Manual |
| Welcome to the Panther System Service Manual
|
Updated to include links to Panther LINK, PLUS, and Track Ready |
| Throughout — Fixed Grammatical, Verbiage, Spelling errors, and general flow for improved readability |
Improve readability and experience |
| Throughout — Removed unneeded or duplicated words, sentences, and/or procedure steps |
Improve readability and experience |
| Throughout — Updated formatting throughout the entire manual for consistency between text type, photos, diagrams, tables, and general formatting. |
Improve readability and experience |
| Panther LINK
|
New topic for all LINK topics. |
| Panther PLUS
|
New topic for all PLUS topics. |
| Dell OptiPlex XE3 Installation
|
New topic based on TB-01390 Dell XE3 Install |
| Dashboard Procedures
|
New topic based on module owner information |
| Data Sharing Setup
|
New topic based upon TB-01326 Data Sharing Install IFU |
| 16GB Memory Upgrade for XE2 PCs
|
New topic based upon TB-01448 Memory Upgrade for XE2 PCs |
| Panther PLUS Continuous Access Waste Installation
|
New topic based upon TB-1362 Panther Waste on the Fly Installation |
| Solid Waste on the Fly Installation
|
New topic based upon TB-1362 Panther Waste on the Fly Installation |
| GRIFOLS ONLY - LWOTF, Existing Waste Drawer Upgrade
|
New topic based upon TB-1362 Panther Waste on the Fly Installation |
| Universal Fluids on the Fly Module Installation
|
New topic based upon TB-1362 Panther Waste on the Fly Installation |
| Waste on the Fly Installation Verification
|
New topic based upon TB-1362 Panther Waste on the Fly Installation |
| Waste to Drain Installation
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Waste to Drain Installation Procedure for SN#01937 and Below
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Waste to Drain Installation Procedure for SN#01938 and Above
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Create a Access Hole for Tubing in the Waste Drawer.
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Install Waste-to-Drain Bottle Straw Fitting in the Removable Waste Bottle
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Installation of the Waste to Drain Hardware
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Route the Tubing & Signal Cable to Waste-to-Drain Pump
|
New topic based up TB-01389 Panther Waste-to-Drain |
| Route the CAN cable to the Panther COP |
New topic based up TB-01389 Panther Waste-to-Drain |
| Waste to Drain Verification
|
New topic based up TB-01389 Panther Waste-to-Drain |
| MTU Expansion Installation
|
New topic based upon TB-01361 MTU Expansion Installation |
| MTU Expansion Installation Verification
|
New topic based upon TB-01361 MTU Expansion Installation |
| MTU Expansion AutoTeach
|
New topic based upon TB-01361 MTU Expansion Installation |
| MTU Expansion Manual Teach
|
New topic based upon TB-01361 MTU Expansion Installation |
| MTU Expansion Visual Alignment Cues
|
New topic based upon TB-01361 MTU Expansion Installation |
| Firewall Wizard
|
New topic based upon TB-01266 Using the Firewall Configuration Wizard Software
with Cisco ASA 5506 and Cisco ASA 5505 |
| Installing the Firewall Wizard
|
New topic based upon TB-01266 Using the Firewall Configuration Wizard Software
with Cisco ASA 5506 and Cisco ASA 5505 |
| Configuring the Firewall with Firewall Wizard |
New topic based upon TB-01266 Using the Firewall Configuration Wizard Software with Cisco ASA 5506 and Cisco ASA 5505 |
| Cisco 5505 Hardware Setup after Firewall has Been Configured
|
New topic based upon TB-01266 Using the Firewall Configuration Wizard Software
with Cisco ASA 5506 and Cisco ASA 5505 |
| Cisco 5506 Hardware Setup after Firewall has Been Configured
|
New topic based upon TB-01266 Using the Firewall Configuration Wizard Software
with Cisco ASA 5506 and Cisco ASA 5505 |
| Panther
|
|
| Aspirator Drive Motor Current Increase and Speed Decrease Procedure
|
New topic based upon TB-01462 Output Queue Aspirator Drive Motor Current Increase Procedure |
| Pressure Test of the Panther Cooling System
|
New topic based upon TB-01409 Pressure Test of Cooling System (New Gauge) |
| Deactivation and Wash Buffer Solenoid Valve Position Swap
|
New topic based upon TB-01526 Deactivation and Wash Buffer Solenoid Valve Swap |
| Defragmentation Procedure on Windows 7
|
New topic based upon TB-01543 MS Windows 7 Hard Drive Defragmentation from Command Prompt |
| Installing or Replacing the NEW Waste Bottle Block
|
New topic based upon TB-01464 Installation procedure for New Waste Bottle Block/Manifold |
| Pipettor Z-Sledge Motor Removal and Replacement
|
New topic based upon TB-01309 Pipettor Z-Sledge Motor Replacement and Use of Mesh Shim |
| Using the FlashCheck Analysis Spreadsheet
|
New topic based upon TB-01298 Flashcheck Analysis Spreadsheet Version 5.01 |
| Eaton 9SX2000 UPS (Uninterruptible Power Supply)/PDU (Power Distribution Unit) Installation and Operation
|
New topic based upon TB-01556 Using the Eaton 9SX2000 Uninterruptible Power Supply |
| Cooling Module Pump Diaphragm and Valves Removal and Replacement
|
New topic based upon TB-01408 Replacing the Diaphragm and Valves on the Cooling Module Pump |
| Using the FlashCheck Analysis Spreadsheet
|
New topic based upon TB-01298 Flashcheck Analysis Spreadsheet Version 5.01 |
| Output Queue Hook Drive Belt Assembly Removal and Replacement
|
New topic based upon TB-01479 OQ Motor Belt Replacement |
| Enabling Syslog for Cisco AS 5505 and 5506
|
New topic based upon TB-00915 Enabling Syslog for Cisco 5505 and 5506 |
| Creating a Panther Image on a USB
|
Based on Module owner information |
| Fusion
|
|
| Thermocycler Heatsink Thermistor Removal and Replacement
|
New topic based upon TB-01340 Thermocycler Heat Block Thermistor Upgrade |
| Thermocycler Moog Slip-Ring Removal and Replacement
|
New topic based upon TB-01447 Thermocycler Moog Slip-Ring Replacement Procedure |
| Thermocycler Fiber Cleaner Nest Installation
|
New topic based upon TB-01078 Fiber Cleaner Nest Installation and Thermocycler Cleaning Procedure |
| Enabling Fiber Cleaner Nest in Fusion Teach Software
|
New topic based upon TB-01078 Fiber Cleaner Nest Installation and Thermocycler Cleaning Procedure |
| Thermocycler Scanning and Automatic Cleaning Instructions
|
New topic based upon TB-01457 Thermocycler Scanning Instructions |
| Prepare the Panther Instrument
|
New topic based upon TB-01366 INSTALLATION OF SYSTEM AND ASSAY SOFTWARE V6.2 |
| Track Ready
|
|
| Track Ready
|
New topic based upon TB-01368 Track Ready |
| Track Ready Unboxing
|
New topic based upon TB-01368 Track Ready |
| Track Ready Shuttle-to-Panther Installation
|
New topic based upon TB-01368 Track Ready |
| Panther Chassis Modification to Track Ready
|
New topic based upon TB-01368 Track Ready |
New Topics
button at the top of the page to send feedback, comments, or change requests.