Revisions—MAN-06020 Rev. 004

MAN-06020 Rev. 004, 20 April 2020

The following procedures and sections were updated with Version 8.0 of the Panther System Service Manual.

New Topics

Topic	Justification
Revisions — MAN-06020 Rev. 003	To list revisions to the Panther Service Manual
Throughout — Fixed Grammatical, Verbiage, Spelling errors, and general flow for improved readability	Improve readability and experience
Throughout — Removed unneeded or duplicated words, sentences, and/or procedure steps	Improve readability and experience
Throughout — Updated formatting throughout the entire manual for consistency between text type, photos, diagrams, tables, and general formatting.	Improve readability and experience
Throughout — Renamed the Fusion Universal Fluids Drawer to the Fusion Fluids Drawer.	Improve readability and experience
USB/Memory Stick Requirements	New topic based upon TB-01599 PANTHER, TIGRIS, TOMCAT, DTS, AND ESAS SYSTEMS USB/MEMORY STICK REQUIREMENT
PC BIOS Settings before Imaging (SATA RAID On)	New topic based upon TB-01529 BIOS Settings for [CMP-01711] Dell XE2 16GB PCs
Disabling and Reenabling Panther Remote Dashboard (PDDS)	New topic based upon TB-01392 Disabling and Reenabling Panther Remote Dashboard

Revised Topics

Startup Topics

Topic	Additions	Deletions	Justification
Essential Information	Added Waste Drawer Magnetic Latch cut in info.		Improve Servicing

Installation Procedures

Topic	Additions	Deletions	Justification
Pipettor Pressure Integrity Test	Added DiTi Cone Cap information. Changed test results to 0.33 and above are acceptable.		Improve servicing.
Uncrating the Panther System	Updated ShockWatch Info		Improve servicing.
Dell OptiPlex XE3 Installation	Revised boot steps for XE3		Improve servicing.
Run Instrument Setup (Fusion)	Added link to Run System Setup.		Improve servicing.
Software Verification	Updated per ISE review.		Improve servicing.
Dashboard Client PC Installation	Revised per TSE review.		Improve servicing.
Waste to Drain Installation	Updated Waste to Drain Cutout Tool Kit		Improve servicing.
Software Installation and Setup	Added backup the coordinate.coo file.		Improve servicing.
Route the Tubing & Signal Cable to Waste-to-Drain Pump	Changed the tube routing to go UP.		Improve servicing.
MTU Sidecar Installation	Added shimming instructions.		Improve servicing.
LWOTF, New Complete Waste Drawer Installation	Added Y CAN cable diagram. Added step to grease both waste bottle fittings.		Improve Clarity.
Install the MTU Sidecar Covers	Revised steps and images per TSE review.		Improve Clarity.
Universal Fluids on the Fly Module Installation	Revised tubing steps.		Improve servicing.
Installing Image v6.0.13 (for System v7.1.5.4)	Revised per TSE review.		Improve servicing.
How to Install Panther Software	Revised per TSE review.		Improve servicing.
Programming the Firewall with Firewall Wizard v6.0.1.0	Revised per TSE review.		Improve servicing.
Firewall Wizard	Revised steps.		Improve Clarity.
Prepare the Panther Instrument	Updated Trim and Covers Section		Improve Clarity.
Dashboard Server Imaging	Added step to signify the end of the procedure.		Improve servicing.
Panther Plus Installation Procedures	Added links to prereq procedures.		Improve Clarity.
PC Hardware Setup	Removed step 7 for XE2.		Improve servicing.
Assemble the Fusion Sidecar	Revised per TSE review.		Improve servicing.

System Overview

Topic	Additions	Deletions	Justification
None	None	None	N/A

Packing and Relocation

Topic	Additions	Deletions	Justification
None	None	None	N/A

Maintenance Procedures

Topic	Additions	Deletions	Justification
None	None	None	N/A

Safety

Topic	Additions	Deletions	Justification
Prevent Damage Electrostatic Discharge (ESD)	Revised to match Hologic standard.	None	Improve Clarity.

Service Procedures

Topic	Additions	Deletions	Justification
Panther Installation	Revised steps.		Improve Clarity.
Software Installation	Revised steps.		Improve Clarity.
Install System, Assays and Help Software - How to install Software	Revised steps.		Improve Clarity.
Run Instrument Setup (Loading Firmware)	Revised steps.		Improve Clarity.
Incubator Belt Tensioning and Inspection	Revised steps.		Improve Servicing. Improve Clarity.
Sample Mix Station PCB Removal and Replacement	Updated DIP Switch table.		Improve Clarity.
Flashcheck - Lumo Injector Verification Procedure	Updated reset criteria.		Improve Clarity.
Pipettor Service Procedures	Added Integrity Test link.		Improve Servicing.
Real-Time Fluorometer (RTF) Alignment Procedure	Revised steps for v6.2.		Improve Servicing.
Odorcarb Vacuum Filter Upgrade Procedure	Added replacement information.		Improve Clarity.
Changing the PC Name	Updated for v6 Image.		Improve Servicing.
Pipettor cLLD & bLLD Test Procedure	Updated per TSE review.		Improve Servicing.
SysCheck - Lumo PMT Calibration Procedure	Updated per TSE review.		Improve Clarity.
Creating a Panther Image on a USB	Updated for v6 Image.		Improve Clarity.
Thermocycler Scanning and Automatic Cleaning Instructions	Changed to close lid for Peek scan.		Improve Clarity.
Enabling HIV-1 Analyte Mode	Changed HPV to HIV.		Improve Clarity.
Input Queue MTU Rail Alignment Procedure	Revised verification section.		Improve Clarity.
Pipettor Teaching	Added Fusion information.		Improve Clarity.
Eaton UPS Alarm Settings for MS Windows 10	Removed note to attach to SR.		Improve Clarity.
Enabling a Mapped Network Drive / LIS Fileshare	Revised commands for deleting drives.		Improve Clarity.
Teach Handoff Station to Linear Distributor	Updated images to v5.0.12 SSW		Improve Clarity.
	Fixed links.		Improve Usability.

Modules

Topic	Additions	Deletions	Justification
None	None	None	N/A

Removal and Replacement Procedures

Topic	Additions	Deletions	Justification
Magnetic Wash Station Aspirator Removal and Replacement	Updated to include the MagWash OQ in the System tab.		Improve servicing.
Ported Vacuum Manifold Cover	Added pump speed info for Config 3 Vacuum Pump		Improve servicing.
Luminometer Photomultiplier Tube (PMT) Assembly Removal and Replacement	Updated Hex wrench sizing.		Improve servicing.
Magnetic Latch Installation	Added which side the latch is on.		Improve servicing.
Luminometer Photomultiplier Tube (PMT) Assembly Removal and Replacement	Updated hex screw sizes.		Improve servicing.
Fusion Pipettor Removal and Replacement	Removed reference to TB-01050		Improve servicing.
Bleach Bottle Tubing Replacement Procedure (Solvent Bonded Connection)	Updated per TSE review.		Improve servicing.
Sample Mix Station Module Removal and Replacement	Updated per TSE review.		Improve servicing.
Vacuum Power Cable and Fuse Replacement Procedure (Config. 3)	Added navigation breadcrumbs.		Improve clarity.
Wash and Deactivation Buffer Solenoid Valve Removal and Replacement	Added navigation breadcrumbs.		Improve clarity.
Output Module Removal and Replacement List	Added OLV PCB RnR link.		Improve servicing.
Fusion Communication and Organization Processor (COP) Removal and Replacement	Updated DIP switch info.		Improve servicing.
Magnetic Wash Station Aspirator Removal and Replacement	Change part image to the correct aspirator.		Improve clarity.

Deleted Topics

Topic	Justification
Burning an ISO Image onto a USB Flash Drive	Tomcat only procedure.